User's Manual

WizFi360 User Manual
Note
• Irrespective of whether SmartConfig succeeds or not, before executing any other
AT commands,please always call AT+CWSTOPSMART to release the internal
memory taken up by SmartConfig
Example
AT+CWSTOPS MA RT
10.2.2.27. AT+CWAUTOCONN Auto-Connects to the AP or Not
Command
AT+ CWAUTOCONN
Response
OK
Parameters
<enable>˖
-0: does NOT auto-connect to AP on power-up.
-1: connects to AP automatically on power-up.
The WizFi360 Station connects to the AP automatically on power-up by default
Example
AT+CWAUTOCONN=0