User's Manual

WizFi360 User Manual
Commands
AT+CWSAP_DEF?
+CWSAP_DEF:<ssid>,<pwd>,<chl>,
<ecn>,<max conn>,<ssid hidden>
Response
+CWSAP_DEF=<ssid>,<pwd>,<chl>,
<ecn>[,<max conn>][,<ssid hidden>]
OK
or
ERROR
Parameters
• <ssid>: string parameter, SSID of AP
• <pwd>: string parameter, length of
• password: 8 ~ 64 bytes ASCII.
• <ch1>: channel ID.
• <ecn>: encryption method
▶ 0: OPEN
▶ 2:WPA_PSK
▶ 3:WPA2_PSK
• [<max conn>]( optional˅˖maximum number of Stations to which WizFi360
SoftAP can be connected; within the range of [1, 4].
• [<ssid hidden>]( optional˅˖
▶ 0: SSID is broadcasted. (the defaultsetting)
▶ 1: SSID is not broadcasted
Example
AT+CWSAP_DEF=”WIZnet”,”wiznet2018”,5,3
Command
AT+C W LIF
Response
+CWLIF:<ip addr>,<mac>
OK
Parameters
• <ip addr>˖IP address of Stations to which WizFi360 SoftAP is connected.
• <mac>˖MAC address of Stations to which WizFi360 SoftAP is connected
Note
• This command cannot get a static IP. It only works when both DHCPs of the
WizFi360 SoftAP, and of the Station to which WizFi360 is connected, are
▶ 0: SSID is broadcasted. (the defaultsetting)
▶ 1: SSID is not broadcasted
Example
AT+CWSAP_CUR=”WIZnet”,”wiznet2018”,5,3
10.2.2.11. AT+CWSAP_DEF Configures the WizFi360 SoftAP; Configuration
Saved in the Flash Flash
10.2.2.12. AT+CWLIF IP of Stations to Which the WizFi360 SoftAP is
Connected