User's Manual

WizFi360 User Manual
C
omm
ands
A
T+CWSAP_CUR?
AT+CWSAP_CUR=<ssid>,<pwd>,<chl>,
<ec
n>[,<max conn>][,<ssid hidden>]
Re
sponse
+CWSAP_CUR:<ssid>,<pwd>,
<chl>,<ec
n>,<max conn>,<ssid
hidden>
OK
or
ERROR
P
arame
ters
• <ssid>: string parameter, SSID of AP
•
<pwd>: string parameter, length of
•
password: 8 ~ 64 bytes ASCII.
•
<ch1>: channel ID.
•
<ecn>: encryption method
▶ 0: OPEN
▶ 2:WPA_PSK
▶ 3:WPA2_PSK
•
[<max conn>]( optional˅˖maximum number of Stations to which WizFi
360
SoftAP can be connected; within the range of [1, 4].
• [<ssid hidden>]( optional˅˖
hidden>]
Re
sponse
+CWSAP:<ssid>,<pwd
>,<chl>,<ecn
>,<
ma
x conn>,<ssid hidden>
OK
or
ERROR
Parameters
• <ssid>: string parameter, SSID of AP
•
<pwd>: string parameter, length of
•
password: 8 ~ 64 bytes ASCII.
•
<ch1>: channel ID.
•
<ecn>: encryption method
▶ 0: OPEN
▶ 2:WPA_PSK
▶ 3:WPA2_PSK
•
[<max conn>]( optional˅˖maximum number of Stations to which WizFi
360
SoftAP can be connected; within the range of [1, 4].
•
[<ssid hidden>]( optional˅˖
▶ 0: SSID is broadcasted. (the default
setting)
▶
1: SSID is not broadcasted
Note
• The configuration changes will be saved in the flash
Exam
ple
A
T+CWSAP=”WIZnet”,”wiznet2018”,4,3
10.2.2.10. AT+CWSAP_CUR Configures the WizFi360 SoftAP; Configuration
Not Saved in the Flash Flash