User's Manual

WizFi360 User Manual
ERROR
P
arame
ters
• <sort_enab1e>˖determines whether the result of command AT+CWLAP will be
listed according to RSSI:
•
<mask>˖determines the parameters shown in the result of AT+CWLAP; 0
means not showing the parameter corresponding to the bit, and 1 means
showing it.
▶ bit 0˖determines whether <ecn> will be shown in the result of AT+CWL
AP.
▶ bit 1˖determines whether <ssid> will be shown in the result of AT+CWL
AP.
▶ bit 2˖determines whether <rssi> will be shown in the result of AT+CWL
AP.
▶ bit 3˖determines whether <mac> will be shown in the result of AT+CWL
AP.
▶
bit 4˖determines whether <ch> will be shown in the result of AT+CWLAP.
Exam
ple
A
T+CWLAPOPT=1,31
10.2.2.8. AT+CWLAP Lists Available APs
Comm
ands
A
T+CWLAP=<ssid>
A
T+CWLAP
Re
sponse
+CWLAP:<ecn>,<ssid>,<rssi>,<mac>
,<chan
nel>
OK
or
ERROR
+CWLAP:<ecn>,<ssid>,<rssi>,<mac>
,<chan
nel>
OK
Paramet
ers
• <ecn>˖encryption method
▶ 0˖OPEN
▶ 1˖WEP
▶ 2˖WPA_PSK
▶ 3˖WPA2_PSK
▶ 4˖WPA_WPA2_PSK
•
<ssid>˖string parameter, SSID of the AP
•
<rssi>˖signal strength
•
<mac>˖string parameter, MAC address of the AP.
• <channel>˖channel number
Exam
ples
A
T+CWLAP
10.2.2.9. AT+CWSAP Configures the WizFi360 SoftAP
C
omm
ands
A
T+CWSAP?
AT+CWSAP=<ssid>,<pwd>,
<chl>,<ecn>[,<max conn>][,<ssid