User's Manual

WizFi360 User Manual
10. Command Description
Each command set contains four types of AT commands
Type
C
ommand Form
at
Description
Te
st Command
A
T+<x>=?
Qu
eries the Set Commands’ internal parameters and
thei
r range of values.
Qu
ery
Command
A
T+<x>?
Return
s the current value of parameters.
Set Command
A
T+<x>=<...>
Set
s the value of user-defined parameters in comm
ands,
an
d runs these commands.
E
xecute
Command
A
T+<x>
Runs
commands with no user-defined parameters.
Notice:
• Not all AT commands support all four variations mentioned above.
• Square brackets [ ] designate the default value; it is either not required or may not appear.
• String values need to be included in double quotation marks, for example:AT+CWSAP=
“WizFi360”, “WizFi360”,1,4.
• The default baud rate is 115200
• AT commands have to be capitalized, and must end with a new line (CR LF).