User's Manual

WizFi320 User Manual

o 2: WPA_PSK

o 3: WPA2_PSK

o 4: WPA_WPA2_PSK

o 5: WPA2_ENTERPRISE

o 6: WPA3_PSK

o 7: WPA2_WPA3_PSK

Notes

• For more details on SmartConfig, please see ESP-TOUCH User Guide.

• SmartConfig is only available in the ESP station mode.

• The message

Smart get Wi-Fi info

means that SmartConfig has

successfully acquired the AP information. ESP device will try to connect to

the target AP.

• Message

Smartconfig connected Wi-Fi

is printed if the connection is

successful.

• Use command AT+CWSTOPSMART to stop SmartConfig before running

other commands. Please make sure that you do not execute other

commands during SmartConfig.

Example

AT+CWMODE=1

AT+CWSTARTSMART

AT+CWSTOPSMART: Stop SmartConfig

Execute Command

Command:

AT+CWSTOPSMART

Response:

Note

• Irrespective of whether SmartConfig succeeds or not, please always

call AT+CWSTOPSMART before executing any other AT commands to

release the internal memory taken up by SmartConfig.

Example

AT+CWMODE=1

AT+CWSTARTSMART

AT+CWSTOPSMART

AT+WPS: Enable the WPS Function