User's Manual

802.11b/g/n Wireless LAN WICED Module

This document is controlled and confidential under the terms of WIZNET

8.2 SPI / I2S interface characteristics

Unless otherwise specified, the SPI /I2S parameters are given in below Table.

Refer to STM32F205RG Datasheet : I/O port characteristics for more details on the

input/output alternate function characteristics (NSS, SCK, MOSI, MISO for SPI and WS, CK,

SD for I2S).

SPI characteristics

1. Remapped SPI1 characteristics to be determined.

2. TBD stands for “to be defined”.

3. Based on characterization, not tested in production.

4. Min time is for the minimum time to drive the output and the max time is for the maximum time to

validate the data.

5. Min time is for the minimum time to invalidate the output and the max time is for the maximum time

to put the data in Hi-Z