User's Manual

WizFi 210 User Manual (WIZnet Co., Ltd.)
23
AT+WAUTH= n=0 to 2
Authentication mode setting;
0 : None
1 : Open
2 : Shared with WEP
Ex) AT+WAUTH=0
AT+WWEPn= n=1 to 4, <key>
WEP key n is set to the value in <key>.
Ex) AT+WWEP1=123456abdc
AT+WWEP3=abcdef12345678901234567890
AT+WWPA= <passphrase>
WPA passphrase set to the value in
<passphrase>.
Ex) AT+WWPA=12345678
AT+WPAPSK= <SSID>,<passphrase>
Computes and stores the WPA2 PSK value.
Ex)
AT+WPAPSK=WizFiDemoAP,12345678
AT+WPSK= <PSK>
Sets the WPA2 pre-shared key to the <PSK>.
Ex)AT+WPSK=00010203040506070809000102
03040506070809000102030405060708090001
AT+
WEAPCONF=
<Outer Authentication>,<Inner
Authentication>,<user name>,
<password>
Set the Outer authentication, Inner
authentication, user name and password for
EAP Security. This command returns the
normal response codes.
The valid outer authentication values are:
Eap-FAST: 43
Eap-TLS: 13
Eap-TTLS: 21
Eap-PEAP: 25
The valid Inner Authentication values are:
Eap-MSCHAP: 26
Eap-GTC: 6
Ex)
AT+WEAPCONF=43,26,guest,1234
AT+WEAP=
<Type>,<Format>,<Size>,<Locatio
n>
<ESC>W <data of size above>
Configure certificate for EAP-TLS
Type: CA certificate(0)/ Client certificate(1)/
Private Key(2)
Format: Binary(0)/Hex(1)
Size: size of the file to be transferred.
Location: Flash(0)/Ram(1)
Ex) AT+WEAP=2,0,100,0 (cont.)
<Esc>W<..data..>
Table 18. Wi-Fi security