User's Manual

WizFi 210 User Manual (WIZnet Co., Ltd.)

(4) Wi-Fi interface

Command Parameters Responses / Effects

AT+NMAC=? Returns the current adapter MAC address.

AT+NMAC2=? Returns the current adapter MAC address.

AT+WREGDO

MAIN=

0: FCC : supported Channel range is 1 to 11.

1: ETSI : supported Channel range is 1 to 13.

2: TELEC : supported Channel range is 1 to 14.

Ex) AT+WREGDOMAIN=?

AT+WREGDOMAIN=2

AT+WS=

[<SSID>[,<BSSID>][,<Channel>][,<

Scan Time>]]

Network scan, returns list of found networks

in the format:

<SSID>,<BSSID>,<Channel>,<RSSI>,<Mode>,

Ex) AT+WS

AT+WS=,,6

AT+WM= n=0 (infrastructure) =1 (ad hoc)

Set 802.11 Station operating mode.

Ex) AT+WM=0

AT+WA= <SSID>[,[<BSSID>][,<Ch>]]

Associate to specified SSID, BSSID, and

channel.

Ex)AT+WA=WizFiDemoAP

AT+WD Disassociate from the current network.

ATH Disassociate from the current network.

AT+WWPS= <METHOD>[,PIN]

Associate to an AP using WPS

METHOD is push button (1) or pin (2).

PIN is the pin for PIN method.

AT+WWPS=2,12345670

AT+NSTAT=? Current wireless and network configuration.

AT+WSTATUS

Adapter reports the current network

configuration to the serial host

AT+WRSSI=? Current RSSI as ASCII.

AT+WRATE=? Current transmit rate as ASCII.

AT+WRETRY= <retrycount>

Value of 802.11 TX retry is reset.

Ex)

AT+WRETRY=5

Table 17. Wi-Fi interface

(5) Wi-Fi security

Command Parameters Responses / Effects