User's Manual

© Copyright 2012 WIZnet Co., Inc. All rights reserved. 13
Type Description
Radio On/Off
Decide radio on/off of wireless AP function.
Network Mode
11b/g/n mixed mode: 802.11b/g/n are supported.
11b/g mixed mode: 802.11b/g are supported.
11b only: only 802.11b is supported.
11g only: only 802.11g is supported.
11n only: only 802.11n is supported
SSID
Enter the name of the wireless network.
Channel
Select the channel that composes the wireless network.
Broadcast Network
Name
AP or Wireless network status can be checked by notifying the SSID to the wireless
device. AP cannot be searched if this function is disabled.
AP Isolation
The communication between stations that are connected to the identical SSID is
blocked.
MBSSID AP Isolation
The communication between stations that are connected to different SSID is blocked.
Type Description
Operation Mode
Decide whether the PHY mode is going to be Mixed Mode or Green Field Mode.
Channel Bandwidth
Fix bandwidth channel to 20MHz.
. Use 40MHz as bandwidth in case connection with wireless station that supports 11n
channel bonding.
Guard Interval
Long: 800nsec, Short: 400nsec
MCS
Control link rate.
Set link rate to auto considering any interruptions.
RDG
The wireless performance can be improved using Reverse Direct Grant, 11n’s RDG
technology.
Extension Channel
Setting for the other 20MHz area when channel bandwidth is set to 40MHz.
STBC
STBC is supported when the value of MCS is 0-7.
A-MSDU
Decide whether numerous MSDUs inside one MPDU will transmit.
Auto Block ACK
Decide whether Block ACK will be transmitted automatically.
Decline BA Request
Decide whether user wants to decline Block ACK request.
HT Disallow TKIP
Decide whether to operate in 802.11g, if using TKIP.
HT TxStream
Setting for number of Tx antennas of 2T2R system.
HT RxStream
Setting for number of Rx antennas of 2T2R system.