User's Manual

WIZ6000 User’s Manual

(WIZnet, Inc.)

5. Serial Configuration

Serial Command Format

It is possible to configure WIZ6000 by using serial command.

RS-232C port’s Pin number 1 of WIZ6000 is Hardware trigger pin.

( ‘1’: H/W trigger disable, ‘0’: enable )

< Frame Format >

Command Frame format

Descriptor STX Command code Parameter ETX

Length(bytes) 1 2 Variable 1

Table 11. Serial Configuration Frame format

Reply Frame format

Descriptor STX Reply code Parameter ETX

Length(bytes) 1 1 Variable 1

Table 12. Serial Configuration Reply Frame format

STX & ETX

Setting Comments

STX ‘<’ : Hex = 3Ch

ETX ‘>’ : Hex = 3Eh

Table 13. Serial Configuration STX & ETX

Reply Code

Reply Comments

S Comm and was successful

F Comm and failed

0 Invalid STX

1 Invalid command