User's Manual

WIZ6000 User’s Manual
(WIZnet, Inc.)
32
4. Demonstration and Test
In this chapter, an example is provided f or you to test the functionality of WIZ6000. The te sting
environments are the followings:
<Hardware>
 A PC equipped with a RS-232 serial port
 WIZ6000 Device Server
 Connect PC and module’s Ethernet port by using an Ethernet Cable
(Direct or Crossover)
 Connect PC and module’s serial port by using a serial cable
<Software>
 Hyper Terminal (or any other terminal program)
 Step 1.
① Connect the PC and WIZ6000 by using a serial cable.
② Connect the PC and WIZ6000 by using an Ethernet cable.
③ Turn on the power switch of WIZ6000.
 Step 2. : WIZ610wi Environment Setup
① On your PC, go to the “Network Setting” and connect to your WIZ60 00 in the “Wi reless
Network Connection”.
② In your web browser, input IP address of WIZ6000 (Default : 192.168.1.254).
If configuration page appears, click “Serial setup” menu and set the serial parameters.
 Step 3. : Data Transmission
① Execute terminal program at the PC. (Ex: Hyper Terminal)
② Set the baud rate as the same value of WIZ6000.
Figure 31. Serial Terminal Program configuration