User's Manual

WIZ6000 User’s Manual
(WIZnet, Inc.)
23
2.2.4.5 Client Setup
In client mode, WIZ610wi connects to an access point.
Figure 22. Client Setup
 Alias Name: Input the name for WIZ6000.
 Band: Select a commu nication protocol for your mod ule. It supports 802.11b, 802.11g and
802.11b/g mode.
 SSID: Input the SSID of a n access poi nt. If y ou do n’t know you r SSID, you can u se the
“Site Survey” to search and connect to an AP.
 Security: Configure security settings (these should match your AP’s settings)
 Advanced Settings: Refer to “2.2.4.3 Access Point Setup”.
 WAN Port: Set the Static or DHCP Client of the WIZ6000’s IP.
 Site Survey: If you click t he “Site Su rvey’ button, all access points near your module are
listed as shown in the figure below. Please select one AP and click “Connect” button. If PC
or application device is set as DHCP Client, the AP will operates as its DHCP server and
WIZ6000 d oesn’t a ct a s DHCP Se rver. Wh en y ou conn ect to an AP with se curity
enabled ,the “Wi reless Secu rity Setup Page” will appear a utomatically to set-up you r
security settings. By using the “Site Survey”, Band, SSID and Security can be configured all
at the same time.