User's Manual

WIZ6000 User’s Manual

(WIZnet, Inc.)

Preamble Type

Beacon Interval

The default value is 100. Enter a value between 1 and 65,535

milliseconds. The Beacon Interval value indicates the frequency

interval of the beacon. A beacon is a packet broadcast by the Router

to synchronize the wireless network.

Table 8. Wireless Advanced Settings

 Access Control

By registering the MA C address of a client, WIZ6000 blocks or allows the client to acce ss. If

you click the “Setup” button, page below appears.

Figure 17. Wireless Access Control

Wireless Access Control Mode : This option allows you to enable or disable the “Wireless

Access Control Mode”. (Options: Disable / Allow Listed / Deny Listed)

Disable: Not use “Wireless Access Control Mode”.

Allow Listed: clients with their MAC registered in the Control List are permitted to access.

Deny Listed: clients with their MAC registered in the Control List are denied to access WIZ6000

 WDS Setting: : If AP mode is set as WDS Repeater, WDS Setting button is activated. WDS is

Wireless Distribution System that is working as a wi reless bridge between AP

and AP. If you click the “Setup” button, the page below appears.