User's Manual

WIZ6000 User’s Manual

(WIZnet, Inc.)

 Advanced Settings : If you click the “Setup” button, below page is appeared.

Figure 16. Wireless Advanced Settings

Field Description

Fragment

Threshold

This value specifies the maximum size for a packet before data is

fragmented into multiple packets. If you experience a high packet

error rate, you may slightly increase the Fragmentation Threshold.

Setting the Fragmentation Threshold too low may result in poor

network performance. Only minor reduction of the default value is

recommended. In most cases, it should remain as its default value of

2346.

RTS Threshold

When you encounter inconsistent data flow, only minor reduction of

the default value, 2347, is recommended. If a network packet is

smaller than the preset RTS threshold size, the RTS/CTS

mechanism will not be enabled. The Router sends Request to Send

(RTS) frames to a particular receiving station and negotiates the

sending of a data frame. After receiving an RTS, the wireless station

responds with a Clear to Send (CTS) frame to acknowledge the right

to begin transmission. The RTS Threshold value should remain as its

default value of 2347.