User's Manual

WIZ6000 User’s Manual
(WIZnet, Inc.)
15
 Mode : Select mode
- AP : IF AP is selected, WIZ6000 operates as Access Point.
- WDS Repeater : WDS (Wireless Distribution System) that can be used for the
communication between WIZ6000 and WIZ6000.
When this mode is selected, AP function operates at the same time.
 Security : Configure the security options for WIZ610wi. When you click “Setup” button, below
page appears.
Figure 15. Wireless Security Setup
 Authentication
You can select an authentication method for the clients to connect to AP.
Field Description
Open System
or Shared Key
No authentication is imposed to the WIZ6000
When enabling WEP, the configuration is activated.
Open System
with 802.1x
The client authentication is performed by RADIUS server.
Configure the port number, IP address and Password of RADIS
server.
Shared Key
WEB function is activated. Input the Key value.
WPA RADIUS
WPA: Wi-Fi Protected Access
WPA is based on TKIP(Temporal Key Integrity Protocol) IEEE802.11i
standard which complements WEP(Wired Equivalent Privacy). WPA
is the upgraded authentication methods by applying 802.1x and EAP
(Extensible Authentication Protocol).