User's Manual

WIZ6000 User’s Manual
(WIZnet, Inc.)
11
Figure 9. Changing Operation Mode
1)Access Point Mode
In this mode, all Ethernet port s and wireless interface are bridged together and NAT function is
disabled. All the WAN related function and firewall are not supported.
2)Gateway Mode
In this m ode, your d evice can conn ect to the inte rnet via ADS L/Cable Mo dem. The NAT is
enabled and PCs in LAN ports share the same IP to ISP through WAN port. WAN connection
type can be setup in WAN page by using PPPOE, DHCP client, PPTP client or static IP.
3)Client Mode
In this mode, your device act as a clie nt. If you configure PC or application device a s DHCP
client, Access Point will be the DCHP Server and WIZ610wi doesn’t act as DHCP Server.