User's Manual

WIZ6000 User’s Manual
(WIZnet, Inc.)
9
2.2.3 Network Setting
You can configure network parameters of WIZ6000
Figure 6. Network Setting
 IP Address: The default IP Address is set as “192.168.1.254”.
 Subnet Mask: The default Subnet Mask is set as “255.255.255.0”.
 Default Gateway: The default Gateway is set as “0.0.0.0”.
 DHCP: If you want to activate the DHCP Server function, select the “Server”.
If not, select “Disable”.
Notice
When the WI Z6000’s IP address is m anaged by another DHCP server in the upper layer,
the DHCP function in your wireless module will be disabled. All your clients connecting to
your WIZ6000 can not recognize your module as a DHCP server.
 DHCP Client Range: When WIZ6000 operates as the DHCP Server, the IP address range
must be assi gned in ord er for the client s to conn ect. If the DHCP
server function is disabled, this DHCP Client Range is not activated.
 Show Client: If you click the “Show Client” button, a window is popped up to show a list of
clients.
 Apply Changes: By clicking this button, the modified values are applied. After changing,
the page is refreshed to re-connected to the new IP address.