User's Manual

WIZ6000 User’s Manual
(WIZnet, Inc.)
6
2. Getting Started
This manual describes all configurations in detail.
For the quick and easy installation, please refer to “ WIZ610wi Quick Installation Guide”.
2.1 Hardware Installation

STEP1: Connect the WIZ6000 to the HUB or PC by using a network cable.

STEP2: Connect the WIZ6000 to the serial device by using the RS-232C serial cable.

STEP3: Insert the power supply co nnector to the WIZ6000 by using the 5V / 2A
DC power adaptor.

STEP4: Configure the network parameters of WIZ6000 and your PC.
- The default IP address of WIZ6000 is “192.168.1.254”.
Your PC’s IP address should start with these three sets of numbers “192.168.1.XXX”.
- WIZ6000 and PC can be connected through wireless network.
Connect to WIZ6000 from PC by using default SSID “WIZ610wi”
2.2 Configuration
2.2.1 Connecting the Web page of WIZ6000
1) Open a web browser on your PC and input “192.168.1.254”, the default IP address of
WIZ6000.
Figure 2. Connecting to the Web page of WIZ6000
2) A pop up will request you to input your User ID and Password.
Default User ID : admin, Password : admin