User`s manual

WIZ-Embedded WebServer User’s Manual
© Copyright 2007 WIZnet Inc. All rights reserved
23
STEP 2: Connect 5V DC adaptor to WIZ-Embedded Webserver board.
4.2.2. Testing the Function of Web Server
STEP1: Supply the power to WIZ-Embedded WebServer board.
STEP2: Configure the board by using Configuration Tool.
STEP3:Execute the web browser and input the IP address of the WIZ-Embedded board to access
the webpage.
STEP4: If connection is appropriately processed, ‘index.html’ page is displayed on the web browser.
Figure 20. WIZ-Embedded WebServer index page
STEP5: Click ‘Digital Ouput’ menu at the web browser, and control the LED and LCD installed on
the WIZ-Embedded WebServer Base Board.