User`s manual

WIZ-Embedded WebServer User’s Manual
© Copyright 2007 WIZnet Inc. All rights reserved
13
⑤ Serial Connector(UART0)
The debugging information is transmitted through Serial connector when proceeding
development.
⑥ Serial Connector(UART1)
The debugging information is transmitted through Serial connector when proceeding
development.
⑦ LED
4 LEDs are installed in the WebServer Base Board, and connected to PORTB.4~7.
.
Figure 6. WIZ-Embedded WebServer LED
⑧ System Reset Switch
⑨ Switch
Switch is connected to PORTE.5~6. It is the slide switch.
Figure 7. WIZ-Embedded WebServer Switch
⑩ 16X2 character LCD
16x2 LCD is controlled with the method of 4 bit control It is connected to PORTD and