User manual
WIZ-600Wi User Manual
© Copyright 2008 WIZnet Inc. All rights reserved
8
2. WIZ600Wi Module
2.1. Module Configuration
2.1.1. Connecting Web Browser
WIZ-600Wi configuration can be processed though web browser. As default IP address of
WIZ600Wi is ‘192.168.1.254’, the IP address of PC should be changed as ‘192.168.1.x’ for normal
connection.
The default log-in information is <username : admin> & <password : admin>.
The connection process is as below.
STEP 1>
<When connecting through Ethernet>
Checking IP address of PC (Control Panel -> Network and Internet Connections -> Local Area
Connections -> Internet Protocol (TCP/IP) )
<When connecting through Wireless Lan>
Checking IP address of PC (Control Panel -> Network and Internet Connections -> Wireless
Network Connections -> Internet Protocol (TCP/IP) )
Figure 1. Checking & Changing IP address of PC
STEP 2> Plug the WIZ600Wi module in the base board, and connect the Lan cable and power
adaptor. Be sure to check if input power is DC5V before supplying the power.