User manual

WIZ-600Wi User Manual
© Copyright 2008 WIZnet Inc. All rights reserved
22
2.2.5. Access Ctrl
It configures AP access control.
Figure 10. Configuration Tool – Access Ctl
à MAC ACCESS CONTROL
It registers MAC address of Stations accessible to AP, and configures access allowance
of the Stations.
- MAC Filter
z Open : Allowing the connection from all MAC addresses
z Allow : Allowing the connection from specified MAC addresses
z Deny : Denying the connection from specified MAC addresses
z Disable : Mac filter is not used.
- MAC Address : Adding MAC address to be used for MAC Filter
à Packet Filter
It blocks the packet from the specified port.
- Use Packet Filter : It configures if ‘Use Packet Filter’ is used or not.
- Port (1-65535) : Input the port number to be blocked
- Protocol : Select the protocol to be blocked