User manual

WIZ-600Wi User Manual
© Copyright 2008 WIZnet Inc. All rights reserved
20
- DNS Server 1 : The first DNS server address to be assigned to the server
- DNS Server 2 : The second DNS server address to be assigned to the server
2.2.3. DHCP Server
This page configure DHCP server and Relay function of AP.
Figure 8. Configuration Tool – DHCP Server
à DHCP SERVER CONTROL : It selects if ‘DHCP MODE’ is enabled or not.
-Start IP Address : It configures ‘Start IP address” to be assigned to DHCP.
-Last IP Address : It configures ‘Last IP address’ to be assigned to DHCP.
-Subnet Mask : It configures Subnet Mask to be assigned to DHCP.
-Gateway : It configures Gateway address
-DNS Server: It configures DNS Server value.