User manual
WIZ-600Wi User Manual
© Copyright 2008 WIZnet Inc. All rights reserved
19
2.2.2. Network
It configures internal network of AP.
Figure 7. Configuration Tool – Network
à NAT CONFIGURATION
- Use NAT : It configures ‘Use NAT’ is enabled or not.
à NETWORK CONFIGURATION
- Network Mode
z DHCP : When using dynamic IP address, select the ‘DHCP’. As operating as
AP DHCP Client, it acquires IP address from DHCP server connected to
Internet line.
z Static : When using fixed IP address, select the ‘Static’. User should manually
input IP address, subnet mask, gateway address & DNS address for AP.
- LAN IP Address: When using NAT, configure LAN IP.
- LAN Subnet Mask : When using NAT, configure LAN subnet mask.
- Gateway : When using NAT, configure LAN gateway.