User manual
WIZ-600Wi User Manual
© Copyright 2008 WIZnet Inc. All rights reserved
18
à ADVANCED WIRELESS CONFIGURATION
- MAX User : It configures user number from 1 to 24.
- Beacon interval : It is the transmission interval of Beacon. Beacon contains the
information necessary for the communication including SSID.
- DTIM Period : DTIM is used for Power Saving or Multicast/Broadcast. It can be
configured in the range of 1~255.
- Fragment Length : Fragment is the unit of packet segmentation. It can be
configured in the range of 256 ~ 2346 Byte. If communication environment is
not good, lower value is more advantageous for the transmission.
- RTS/CTS Length : It is the minimum size of the packet of CTS(Clear to Send)
signal responding to RTS (Request to Send) signal. It can be configured in the
range of 256 ~ 2346 Byte.
- High Speed Rate : This is the function to transmit high-speed data. It is for the
best performance of the system.
- Use AR : It continuously checks if smart antenna has any physical obstacles in
the home or office environment. If there is any obstacle, it controls radio signal
to prevent performance deterioration.
- Short Preamble : Preamble is the signal to synchronize transmission timing
between two systems at the network communication. Long Preamble Type is the
default value. In here, it configures if Short Preamble Type is selected or not.