Datasheet
16
17
1/2013 | www.soselectronic.com 1/2013 | www.soselectronic.com
sosnews sosnews ASSORTMENTASSORTMENT
Small signal relay AxW-K won´t
refuse any signal
With the Hameg 8000 series devices
you always have on a table all you need
Isn´t it the right time to purchase
a high-performance oscilloscope?
Advantages / Features:
1. very low ESR
2. outstanding filtering
properties
3. high capacity at small
dimensions
4. long lifetime
Advantages / Features:
1. 2A signal relay DPDT (2CO)
2. able to switch even
very small signals, from
0,01mA/10mV
3. very low profile - 5 mm
4. bifurcated contacts for a
higher reliability
5. latching versions also
available
6. low losses (cca <0.1dB/20
MHz)
Advantages / Features:
1. high quality of instruments (accuracy, ranges, usage)
2. possibility of up to 10 instruments at one place
3. 5 various instruments (multimeter, LCR meter, counter,
Order no. Type Description Guide price
55343 K1206-22U-X5R-6,3V-10% Multilayer Ceramic Chip Capacitor 1206 0,11 €
81379 K0805-10U-X5R-6,3V-10% Multilayer Ceramic Chip Capacitor 0805 0,02 €
81480 K1206-10U-X5R-25V-10% Multilayer Ceramic Chip Capacitor 1206 0,05 €
Order no. Type Description Guide price
103525 HMO722 Digital storage oscilloscope 2ch. 70MHz 2GSa/s 2MPts 1377,60 €
103527 HMO1022 Digital storage oscilloscope 2ch. 100MHz 2GSa/s 2MPts 1557,60 €
104741 HMO2024 Digital storage oscilloscope 4ch. 200MHz 2GSa/s 2MPts 2616,00 €
The article with more infor-
mation can be found at our
website. Decode the link
by QR code.
The article with
more information
can be found
at our website.
Decode the link
by QR code.
The article with more in-
formation can be found
at our website. Decode
the link by QR code.
The article
with more in-
formation can
be found at
our website.
Decode the
link by QR
0.01mA, 10mV but even 2A are no problem for the AxW-K series Fujitsu relay. That´s why they´re a
reliable component for a linear-undistorted transfer of diverse signals.
A modular system of laboratory devices Hameg 8000 series is an ideal system for testing workplaces
and school laboratories. At the same time it enables a very effective usage of space.
AxW-K relay series are well-proven 2-pole re-
lays (DPDT) reliable switching even very small
signals, already from 0,01mA/10mV DC, but
they won´t be scared of 1A/30VDC (0,5A/
125VAC). As, circuits for signal processing
usually consist of SMD components, neither
a relay intended for such applications shoud-
n´t be too high. With the height of only 5 mm,
AxW-K relay series meet this requirement very
well and a standard DIL pitch makes their usa-
ge and PCB design easier at the same time.
In the AxW-K series can be found several ty-
pes - with 1.5V - 48V coils, and also bistable
(latching) types (with 1 or 2 coils). Types
A3W,A5W,AL-D5W-K,A12W and A24W are
kept in stock, other types we´re able to pro-
vide you upon order. Besides telecommuni-
cation circuits, AxW-K series relays are ideal
for switching of signals from a wide range of
industrial detectors and sensors, audio devi-
ces and other.
Order no. Type Description Guide price
31808 A-12WK Signal relay 12V 2A 2c 1028R 1,63 €
31809 A-24WK Signal relay 24V 2A 2c 2880R 1,52 €
31810 AL-D5W-K Signal relay latching type 5V 2A 2c 125R 4,34 €
Do you utilize ceramic capacitors
for power supply ltering?
Thanks to their very low equivalent serial resistance (ESR), they provide a very worth function in
power supply parts of various devices. In many cases, there´s no need to add any other types of
filtering capacitors anymore.
SMD ceramic capacitors are nowadays commonly available in relatively very high capacities of units to tens of uF, while keeping small
dimensions (0603 - 1210).
Why to use a ceramic capacitor? First,
it has a substantially lower value of ESR
than electrolytic capacitors and also
lower than tantalum ones. This is reflec-
ted in low losses and outstanding filtering
properties even at high frequencies and
high currents, what is especially benefi-
cial at power supply of fast semiconduc-
tors and in switch-mode power supplies.
Low power consumption of modern com-
ponents enables to decrease an overall
capacity of capacitors in a power supply
part, that´s why in many cases a few uFarads are sufficient. A big advantage is a long lifetime too, be-
cause they don´t contain any liquid electrolyte. Naturally, in devices, where high current peaks occur,
it would be economically inefficient to use ceramic capacitors only. In such cases a combination of
ceramic and tantalum or electrolytic capacitors is ideal.
To have all we need on a table and to maintain enough
space for a work - it is a stable challenge at a work with
electronics. All this is solved by a Hameg 8000 series
modular system.
The system consists of a HM8001-2, main unit, ser-
ving as a power supply and at the same time it is a
holder - frame for any 2 instruments from the 8000
series (instruments don´t have their own power sup-
ply - for their operation they need to be inserted into
the HM8001-2 basic module). Up to 5 such main-
frames can be stocked at each other, what means
up to 10 instruments. At the same time, it enables a
big variability - for example usually a one mainframe
+ 2 instruments are usually sufficient for students in
school.
Available modules:
HM8012 - 4ľ-Digit Programmable Multimeter (max value 49999) with 0.05% basic accuracy,
HM8018 - 25kHz LCR-Meter, measures L, C, R, Θ, Q/D, |Z|, 0.2% basic accuracy,
HM8021-4 - 1.6 GHz Universal Counter, measurement range 0Hz…1.6GHz,
HM8030-6 - 10 MHz Function Generator, frequency range 50mHz…10MHz, output voltage up to
10Vpp,
HM8040-3 - Tripple Power Supply Unit 2x 0–20V/0.5A - 1x 5V/1A, 3-digit switchable displays,
HM800 - Blank Module intended for customized instrument construction.
Order no. Type Description Guide price
48576 HM8001-2 Base unit for 2 modules series 8000 238,00 €
48578 HM8018 Module - LCR meter L, C, R, Q, D 420,00 €
72630 HM8030-6 Module - 10MHz Function Generator 345,00 €
80474 HM8040-3 Module - Power Supply Unit 2x0-20V/0,5A + 5V/1A 282,00 €
Digital storage oscilloscopes HAMEG HMO win many awards because of many reasons, which can
be summarized into one sentence - an excellent price / performance ratio.
Inspite of advanced functions Hameg HMO series oscilloscopes maintain a simple intuitive control, thus a user can focus more on the
measurement itself, than on a setting of the instrument. 6,5“ LCD screen (640x480) is able to display many details. In case, that even this
resolution is not sufficient, it is only necessary to use the „Virtual Screen“ function, when the HMO offers a virtual resolution of 1200x640
and 20 divisions in the Y axis. All HMO series instruments feature a metal chassis and housings, that´s why they´re mechanically robust and
well protected against disturbances (EMI). Hameg HMO oscil-
loscopes can be also equipped with options and accessories
and they can be upgraded for decoding of UART, SPI, I2C and
other buses. Selected types are on stock. As an authorized dis-
tributor of Rohde&Schwarz we´re also able to provide you with
any instrument from the production portfolio of this world-class
producer.
Excellent properties are mainly proven in praxis, in a form of several 100 000 units sold all over the world.