Datasheet
14
15
1/2013 | www.soselectronic.com 1/2013 | www.soselectronic.com
sosnews sosnews ASSORTMENTASSORTMENT
Right-angle LEDs enable soldering
and assembly in one step
Add a sound to your devices
- for an outstanding price
Advantages / Features:
1. rich-equipped development kit
2. supplied with a touch display
3. supports 5 interfaces (RS232,RS485, I2C,
SPI and CMOS RS232) + USB
Advantages / Features:
1. well-proven sturdy industrial
connectors
2. 400VAC / 16A - CA3
3. 250VAC / 10A - CA6
4. IP67 protection
5. connector housing from an
impact resistant PA reinforced by
glass fibres
Order no. Type Description Guide price
121360 EAEDIPTFT70-ATP LCM 800x480 7"TFT, LED BL +TP, RS232,I2C,SPI 388,80 €
128812 EASTARTEDIPTFT7 Evaluation kit for 7,0" TFT including display 450,00 €
128815 EA0FP801-70SW Mounting bezel for eDIPTFT70 black anodized alumin 63,70 €
The article with
more information
can be found at our
website. Decode
the link by QR
code.
The article with more information
can be found at our website.
Decode the link by QR code.
Right-angle LED indicators Kingbright L-1384 series provide a signifi-
cantly more simple usage in comparison to standard wire-leaded LEDs.
Reliable loudspeakers needn´t be expensive. K50/8 from company Visaton is a good
example of a universal louspeaker suitable even to less favor conditions for a very
affordable price.
If you have an application, where you need to solder LEDs with wire leads bent into a right angle or
even to create a row of such LEDs, then the L-1384 series is the right choice for you.
L-1384 consists of a LED assembled into a plastic housing in the way that the wire leads are in the
right angle. The fact that the wire leads are shaped from production, eliminates possible damage
of the LED at shaping by a customer (malfunction caused by an inner tension can occur after some
time). Moreover, LED leads are trimmed to a length suitable for soldering to a PCB. Plastic housing
from the non-flammable nylon (UL94-V0) contains a knop and a groove enabling to interlock LEDs
K50/8 belongs to 5 cm (2“) industrial loudspeakers with an increased resistance. IP65 (from the side of membrane after
building into an appropriate housing) says it all. Plastic membrane from mylar is UV-resistant and a metal basket ensure a
long-term stable properties in a wide range of temperatures. K50 also meets another requirement important for the most
of applications - small profile - 17mm only.
Thanks to its small dimensions, low profile, resistance and last but not least also an affordable price is the K50 a suitable
component for a sound output of various devices like audio door-keeper, lifts, machines and control panels.
Advantages / Features:
1. universal right angle
LED indicators
2. possibility to interlock
to rows
3. trimmed wire leads for
a direct PCB mounting
4. contrast increasing
black housing
Advantages / Features:
1. universal loudspeakers for industrial devices
2. UV-resistant mylar membrane and a metal basket
3. operating temperature range -25 to +70°C
4. suitable for outdoor usage, IP65
5. excellent price / performance ratio
Order no. Type Description Guide price
49301 L-1384AL/1ID LED 3mm 20mcd 625nm 60° red Right Angle 0,14 €
49302 L-1384AL/1GD LED 3mm 15mcd 568nm 60° green Right Angle 0,13 €
54487 L-1384AL/1YD LED 3mm 20mcd 60° yellow Righ 0,12 €
Order no. Type Description Guide price
46354 K50/8 Miniature speaker 2/3W 250-10000 D50H17 IP65 1,68 €
61401 K20.40/8 Miniature speaker 1/2W 300-20000Hz 40x20x8 3,60 €
The article with more information can be found at our
website. Decode the link by QR code.
The article with more information
can be found at our website.
Decode the link by QR code.
Simulate, test, develop
In a wide portfolio of development tools for displays from company Electronic Assembly can be
found evaluation boards for development of applications with eDIP displays family, including a con-
nectivity via all common industrial interfaces.
Everyone who already ever designed his own development board knows, that it takes a lot of time to design, construct and assemble such a
board. That´s why a ready-made development board at an affordable price is always a big simplification. EA EVALeDIP320-TFT70 develop-
ment kit is a beautiful example of such a set, as it provides an immediate access to a full display functionality and it comes rich-equipped. At
the same time it meets a criterion of an acceptable price, because the difference in price of the development board and the display itself is
approx. 50 Eur only.
EA EVALeDIP320-TFT70 enables to develop applications in an elegant way and to use all possibilities of 5.7“ and 7“ Electronic Assembly
displays. The development kit contains an evaluation board (USB), 7“ display with a touch panel, CD with SW and drivers, 5 small PCBs
enabling a communication through industrial interfaces (RS232, RS485, I2C, SPI and RS232-CMOS level), USB cable and a line adapter.
The development kit enables to also develop applications, which use input/output pins of the display - 8 push-buttons and 2 trimmers enable
to control I/O pins and simulate analog signals, while 8 LEDs indicate logic levels at the corresponding outputs. An advantage of Electronic
Assembly displays is, that black-anodized aluminium frames (bezels) are available for many types.
A connection resistant to dust
and water - Hirschmann CA series
If you want to have a certainty, that you´ve done a maxi-
mum for security of your connections, use the CA series
connectors Hirschmann. Also this way can the features of
these connectors be summarized.
CA series of round industrial connectors from company Hirschmann (a member of
Belden group), meets all requirements asked from industrial connectors. Plastic body
is from a durable polyamide reinforced by glass fibres. This material is in many cases
more advantageous than a metal and also eliminates problems with a possible cor-
rosion in a harsh environment (chemical industry, moisty environment, agriculture,
renewable-energy sources, ...). CA connectors are produced in versions CA3 (3 po-
ples + 1PE) and CA6 (6 poles + 1PE). Similarly, like every decent connector, even the
CA3/CA6 is designed in the way, that PE pins are the first to connect, what ensures
a reliable protection already at connecting and the equalization of gnd potentials at
the same time (increased ESD protection). Reliable electrical contact is ensured by
silver-plated contacts. The main difference between CA3 and CA6 is the maximum
current and voltage. It can be said, that it is worth to put your hands on the CA series.
Order no. Type Description Guide price
36556 CA3GS Circular Industry Connector M, Panel 3P+PE, IP67 4,00 €
36559 CA6GD Circular Industry Connector F, Panel 6P+PE, IP67 5,90 €
49985 CA3LD Circular Industry Connector F 3P+PE, IP67 6,70 €
50373 CA6LS Circular Industry Connector M 6P+PE, IP67 6,20 €
to each other. It also ensures a simple assembly and a trouble-free creation of a
uniform row. Black color also increases contrast of the LED.
A relatively low forward voltage in a range of 1.85-2.2V (@20mA) enables a troub-
le-free usage even in the low voltage applications.