User Manual

Page 6
Note 1: One side of STAC 4 has a reduced diameter (see next page) and should be mounted on the boom
pole from its wider diameter side. Therefore, when moving the STAC from left to right side (and vice versa)
on #1 boom pole, STAC should be flipped to its other side
Note2: Tighten STAC only when they are clamping two matching boom poles (Do not clamp a high level of
pressure to STACs when they are clamped to a single pole )
Warning: Failing to insert the assembled poles completely, can result in system damage due to
insufficient overlap between the two poles
Correct assembly
Wrong assembly