User Manual

Page 17
Disassembly
When the CU2pack is not in use, you can disassemble the system and store all components within the backpack
or inside the supplied poles storage sleeve
Poles disassembly instructions using the external sleeve:
1. Disconnect your camera by opening bolt 6a
2. Open STAC 4 between poles 3c-3d and 3b-3c
3. Disconnect poles 3c and 3d and insert them into sleeve 5. Fasten it's cord lock 5a and its Velcro 5c
4. Disconnect pole 3b and insert it and STACs to one of the backpack compartments
5. Attach the sleeve to the backpack by using 1f sleeve holding straps and secure it by attaching the sleeve
hook 5b to the top hanging webbing of the backpack