User Manual

Page 10
Connecting and adjusting your
camera
The three way camera assembly provides 3 motion axis
to adjust your camera angles:
6c Pan control with special Wizmount thumb knob
6b Roll axis control with stainless steel bolt
6a Tilt axis control with stainless steel bolts
7 Leash outlet to secure your camera (leash kit is
optional)
Special Wizmount pan adjustment thumb knob 6c
has two functions :
1. Securing the camera assembly mounts to pole 3d
2. Locking the pan axis at the desired angle
Note: The thumb knob 6c has a special safety mechanism that ensures it cannot be fully unscrewed and
removed. Do not try to remove it by applying strong force as you will break the safety mechanism
Mounting of GoPro Hero 1,2 and 3
1. Unscrew bolt 6a and take it out
2. Insert GoPro Camera.
3. Replace bolt 6a and tighten it for the desired camera angle.
Notes:
1. As Wizmount mount assembly is made from Aluminum Alloy and is
more rigid then plastic, it requires slightly more force to enter the
camera house to the tilt control mount compared to GoPro mounts
2. Bolts 6a and 6b are fully compatible with GoPro Knobs.
Nevertheless, to achieve strong and stable camera mounting, we
recommend using Philips screwdriver even if you are using the
GoPro knob.