User's Manual

* To terminate the setting menu, hold the mode switch button for more than 2
seconds, or leave it for 10 seconds to switch to the default screen.
Battery level display;
4 batteries (100%), 3 batteries (70%), 2 batteries
(40%), and 1 battery (10%).
* One battery (10%)level, Counter battery
replacement required by trained person.
If user press the mode switch button for more than 2
seconds, the counter’s ID will be displayed and can enter
the setting menu.
Enter the setting menu, press the mode switch button short
to move to "LEAVE" menu, and set when the mode switch
button is pressed twice. It is an item that must be selected
from the counter to enable communication with the repeater
after channel synchronizing.
* If the counter is interlocking with the repeater, the antenna
icon disappears when "LEAVE" is set.
Enter the setting menu and press the mode switch button
short to find and move the channel you want to connect.
After moving to the channel you want to set, you press the
mode switch button twice and you are set to that channel.
* To set up an interlocking channel, execute the counter
addition in the program and set up the counter "LEAVE"
after moving the interlocking channel.
6/8