User Manual

89
Main Menu Options
computer: Connection Device and Baud Rate. The settings
for these options should always be the same as their settings
on the Desktop (see Communications Settings on p. 110).
Note: You can select settings for these options, both on the
Pen and on the Desktop, by running the Communications
Wizard (see p. 110).
Connection Device
Specifies the connection device you are using for Pen-
computer communications (serial port or infrared).
1. Select Connection Device.
2. Scroll to the correct device and press 2.
Baud Rate
Adjusts the speed at which the Pen will communicate with
the computer. This rate should match the rate specified in
the Desktop application. The default baud rate is 115,200. If
the baud rate was changed on the Desktop, change it on the
Pen, as well.
1. Select Baud Rate.
2. Scroll to the correct baud rate using 4 or 5.
3. Press 2.
Auto Shut-Off Time
By default, if your Pen is idle for 60 seconds, it shuts off
automatically. Use this option to change the automatic shut-
off time.
1. Select Auto Shut-Off Time.
2. Scroll to the automatic shut-off time you want using
4 or 5.
3. Press 2.