User Manual

111
QuickLink Desktop Functions
later on as well. This is particularly useful if you change the
communications type or experience a problem with
communications between the Desktop and your Pen. To run
the Communications Wizard, select Communications
Wizard from the Help menu of the Desktop.
Manually Changing Communications Settings
To manually change the communications settings on the
Desktop:
1. Select Communications Settings from the Pen
Communications menu. The Communications
Settings dialog box appears.
2. To change the serial port to which the QuickLink
communications cable or external infrared device is
connected, or with which the internal infrared device is
associated, click the arrow on the Serial Port box and
select the serial port you are using from the drop-down
list.
3. The speed at which data is transmitted for serial port
communications is called the baud rate. The default
baud rate is 115,200. To change the rate, click the
arrow next to the Baud Rate box and select the baud
rate from the drop-down list.
4. To switch from serial port to infrared communications,
click the IrDA communications checkbox. Next, click
the arrow next to the IR Driver box and select the
correct driver from the list.
5. Click OK.
Adding and Removing Pen Components
You can customize your QuickLink Pen by adding and
removing components. The following types of components
are available: