User Manual

11
Getting Started
Setting up your Pen
Step 1. Insert Batteries
1. Remove the battery compartment cover from the back of
the Pen.
2. Insert two “AAA” batteries (included in packaging) in
the correct direction.
3. Replace the battery compartment cover.
Step 2. Remove Protective Cover
Remove the protective cover from the tip so that the
electronic eye is exposed. Always replace the cover when
you are done scanning.
Button Function
1 Turns the QuickLink Pen on and off.
2 • Enters a menu option or a command.
• Switches the Pen to scan or edit mode.
• Toggles a checkbox on or off. A
checkmark (√) is displayed when it is on.
3 • Returns you to the previous menu.
• Closes a pop-up alert or message box.
• Exits the Edit Menu.
Basic Pen Commands
The Pen Buttons and Their Functions
The keypad has seven buttons. The functions of each button
are listed below.