User guide

Note: You can also use these functions to enter a new
word.
Selecting Part of an Image
This option enables you to select and translate part of the
scanned text. It is useful when:
•
You have scanned several words and the word
automatically selected and translated is not the word
you wanted to translate.
•
You want to translate an expression consisting of
several words.
•
You want to delete letters at the beginning or end of a
word.
Selecting with one cursor
Use one cursor when you want to select just one word
from the image. The left cursor selects the word
immediately to its right, the right cursor selects the word
immediately to its left.
1. Press
until the image appears on the display.
2. Press
; the left cursor appears on the display.
3. Move the cursor to the left of the word you want to
translate, using
or .
4. Press
; the translation appears.
To change from the left to the right cursor or vice versa,
press
or (before moving the cursor).