User manual
The WizCom Desktop
40
Offline Mode
When the computer is offline, communications with the
Pen are disabled. The Desktop cannot detect
communications from, or initiate communications with the
Pen. The Pen Communications menu options are
disabled.
To disable Pen communications, select Turn Pen
Communications Off from the Pen Communications
menu on the Menu Bar, or deselect the icon on the
Toolbar. The option toggles to Turn Pen
Communications On.
Select Turn Pen Communications On to re-enable Pen
communications.
Online Mode
When you are working online, communications with the
Pen are enabled. The Desktop occupies the
communications port on your computer and is in a state of
readiness to receive communications from the Pen. It
detects Send Stored Files to PC or Scan to PC
commands being sent from the Pen, and can also initiate
Desktop-controlled communications, such as optimizing
the Pen file system using the Pen's PC-Controlled
Communication option.
Note: When Pen communications are enabled, the
communications port specified in the communications
settings on the Desktop is busy, and cannot be used for
any other purpose.
Optimize the Pen File System
When you delete data from your Pen (either manually or
by using the Flush option in the File Transfer Settings
dialog box), the area that was used by the data is not
actually deleted from the extension card memory. The
Optimize Pen File System option enables you to free
up those areas on the Pen’s extension card memory that
are no longer being used by application data.
To optimize your Pen's file system: