User manual

Getting Started
9
Transferring Files to the PC Using the WizCom Desktop
The WizCom Desktop must be installed in order to connect the Pen to the
PC and transfer files. If you have not yet installed the WizCom Desktop see
Installing the WizCom Desktop on page 4.
Make sure that the USB cable is connected to both the Pen and PC.
On the PC:
1. Launch the WizCom Desktop. If the WizCom Desktop is not
already running, it can be activated by double clicking on the
WizCom Desktop icon on the Windows desktop.
2. The WizCom Desktop icon
will appear in the Windows
taskbar, in offline mode (gray).
On the Pen:
From the Pen Main Menu select Connect to PC.
Connect to PC in the Pen Main Menu
The message "Connecting to PC..." will appear.
Note: If the message "Error Connecting to PC" appears, check that the
USB cable is connected to both the Pen and PC, and that the WizCom
Desktop has been installed correctly and is running (the gray icon is visible
in the notification area of the Windows taskbar).
Pen-PC Communications:
When the Pen and PC successfully establish communications, the message
"Connected to PC. Press ESC key on Pen to exit" will appear on the Pen
screen.
The WizCom Desktop will appear on the PC screen, and the icon in the
taskbar will change from offline to online (green).