User`s guide
Furniture Wizard 2007 FAQ
Click the OK button and the folder containing your data file will open. Find the file named
Wiz_data.mdb (on some systems this just shows up as Wiz_data.) Click on it once using your left
mouse button to highlight it. Click on your Edit menu on the top of the window and click on Copy.
It is important that you do not
click on Cut at this point as this action will remove the data file from
its current location.
After you have copied the file using
the above steps, you can close this
window by clicking on the X in the
upper right-hand corner. It is now
time to move the file to your backup
drive. Proceed next to the section that
best describes your chosen backup
solution.
Step 3:
Copy the data file to a backup
device
At this point we will place the data file
we copied in the previous step on a
backup device. There are a couple of
backup storage devices most of our
users use and we recommend. The cheapest, easiest and most time effective device for our
users is an Iomega Zip drive. However, with the widespread installation of CD-RW drives, CD
recorders are a popular and viable means of backing up as well. The sections below outline the
specifics of backing up with each method.
Steps to backup to a CD drive using Adapted Easy CD Creator
Launch Adaptec CD Creator. When the main screen shows up, right-click in the lower portion of
the screen as demonstrated below. A menu will pop up under your mouse cursor. Click on
“Paste” to add the Wiz_data file you just copied in the previous section to the list of files to be
burned to CD.
176