User`s guide

Appendix C - Configuring Hardware and Other Devices
You will now in the “Adjust Wizard Configuration” screen. Here you should click
on the “Extended Preferences” button. A new window, “Extended Preferences” will now
come up. Click on the “Scanners” tab at the top of this window.
Click on “Extended Preferences”
Put a checkmark next to “Symbol Little Scanner” in the lower left-hand corner of
the window. This will let Furniture Wizard know that you will be using the Mini-Scanner.
Now on the right side of the window, click on the down-arrow next to “Comm 1” and
select the Comm port that your scanner is connected to.
Now please exit out of “Extended Preferences”, and then exit out of “Setup and
Registration”.
Congratulations!
You are now ready to use your new Mini-Scanner.
160