User`s guide

Appendix C - Configuring Hardware and Other Devices
Installing the Mini-Scanner—USB Version
1. Take the cable that was included along with your Mini-Scanner
and plug into an available USB port on your computer.
2. The computer will prompt you to install drivers for the Mini-
Scanner.
3. Insert your Furniture Wizard CD, and click on “Browse” to locate
the appropriate drivers.
USB Cable
a. If you have Windows 98 or 98Second Edition, use
Windows 98 Driver located on your Furniture Wizard
Install CD in the “Mini Scanner\Win98 Drivers” folder.
b. If you have Windows 2000, or Windows XP, use the
Win2K_XP Driver located on your Furniture Wizard
Install CD, in the “Mini Scanner\Win2k_XP” folder.
4. Your computer will prompt you for a restart. Go ahead and
restart it.
5. After the restart, open up the device manager for your computer.
a. For Windows 98/ME
i. Open up your control panel, and double-click on
the System icon.
ii. Click on the Device Manager tab in the top.
b. For Windows 2000/XP
i. Open up your control panel, and double-click on
the System icon.
ii. Click on the Hardware tab, and click on the
Device Manager icon.
6. Under Ports (COM&LPT) find “Edgeport Serial Port”.
7. Note the Comm port in parentheses. This is the Comm port that
you will need to enter in Furniture Wizard to use the Mini-
Scanner.
8. Double-Click to open the settings for the Comm port.
9. Click on the “Port Settings” tab.
10. Change the settings to match the following
a. “Bits Per Second” --------------------------------------57600
b. “Data Bits”-------------------------------------------------------8
c. “Parity”------------------------------------------------------None
d. “Stop Bits”--------------------------------------------------------1
e. “Flow Control”----------------------------------------Hardware
11. Click OK to save the settings.
12. Close the Device Manager
13. In the folder which you extracted the drivers, find the following
files:
a. ABSREAD.exe
b. CSP2.dll
14. Copy those files into your C:\PROGRAM FILES\FURNITURE
WIZARD folder.
15. These files should now be in your C:\ Wizard.mdb folder
156