User`s guide

Appendix C - Configuring Hardware and Other Devices
Below are the settings for each of the forms available. Simply enter the settings
in exactly as shown below. For “Portrait Label”, “Small Tag”, or “Label”, using a 30256
Shipping label, the settings will be as follows:
Use these settings for
“Portrait Label”, and either
“Small Tag” or “Label” if it
is configured to use the
30256 label
After setting up your
tags, you also need to set up
your “Landscape Label”, in
order to be able to print
inventory tags, and other
labels available from within
Furniture Wizard. The settings
are identical to the 30256
settings above, except that
“Landscape” is selected as
the orientation instead of
“Portrait”
For using the smaller 30336
labels as your “Label” tag, enter the
settings as shown.
Once you are finished
entering in your settings, simply exit
the current window, and return to the
main screen of Furniture Wizard. You
are now ready to print your labels.
After entering in your settings, be sure to PRINT your labels, so any
changes can take effect. Do not do a print preview; otherwise any changes you
have just made may be lost.
Set the orientation to “Landscape”
for the “Landscape Label”. All other
settings are identical to above
The settings for using the
30336 labels as your
“Labels” tag
NOTE
154