User`s guide

Appendix C - Configuring Hardware and Other Devices
This will open up the “Dymo LabelWriter Properties” window. In the bottom left
corner of this window, click on “Print Test Page”.
Click on “Printer Test
Page” from the
“Dymo LabelWriter
Properties” window.
This will print out a
“Windows Test
Page”. If the test
page does not print,
you may need to
check your Dymo’s
connections and
settings
Your Dymo should now print a label with the Windows logo and some text. If for
some reason your Dymo was not able to do this, check to make sure it is properly
plugged in, and the drivers are installed correctly. If it still doesn’t work, contact Dymo
technical support, and they can assist you with getting to this important step.
Your printer names cannot exceed
31 characters, or you will get an error when
printing from Furniture Wizard. Rename your
printers to something shorter, such as the
printer’s model number or location.
To rename a printer, right-click on
the printer whose name is too long, and
select “Rename”. You can now type in a
new name, and hit enter to save.
NOTE
147