User`s guide

Appendix C - Configuring Hardware and Other Devices
The first thing that you
need to do is have Furniture
Wizard set up for printing is to
select the “Windows Default
Printer” at the top of the
window. This is the printer
that will be used to print all of
your reports under Furniture
Wizard. Whichever printer
Windows has selected as the
default Printer, Furniture
Wizard will list here.
Under most
circumstances, you will use
the same printer for most
things, such as POs, invoices,
work orders, and inventory
transfers.
Next to each item that
you will be printing, select the
printer you wish to use.
Once you have
selected the proper printer,
you need to specify how
Furniture Wizard should use
it.
Double click on the
name of the form that you
would like to configure.
This will bring up the
“Printer Settings” window for
that specific form.
Since most forms are
meant to be printed on
“Letter” size paper (8.5”x11”),
you should use the settings
shown below.
The “Printer Setup” window. Select which
printers will be used for each item printed out
Enter your settings
exactly as shown
here, which is the
default settings for
most printers.
Once you have input the settings, click on the exit button.
Use this as
settings for your
Invoices, POs, Transfer
Orders and Work
Orders. For all other
items, refer to the table
below.
143