User`s guide

Appendix C - Configuring Hardware and Other Devices
This will open up the “Printer Properties” window. In the bottom right corner of
this window, click on “Print Test Page”.
Click on “Printer Test
Page” from the
“Printer Properties”
window. This will
print out a “Windows
Test Page”. If the test
page does not print,
you may need to
check or configure
your printer before
continuing
A windows test page will now be printed. If this printed properly, then you are
ready to proceed. If you have problems printing your test page, then you may need to
make sure your printer is on, and properly connected to your computer. Refer to your
printer’s documentation on how to correct this situation. If windows cannot print its test
page, Furniture Wizard will be unable to print to those printers also.
Your printer names cannot
exceed 31 characters, or you will get
an error when printing from Furniture
Wizard. Rename your printers to
something shorter, such as the
printer’s model number or location.
To rename a printer, right-
click on the printer whose name is too
long, and select “Rename”. You can
now type in a new name, and hit enter
to save.
NOTE
Right-click on the Printer’s Icon, and select
“Rename” to change its name if it is too long
141