User`s guide

Appendix B - Download and Networking Instructions
Setting Up Your Workstations for Furniture Wizard
In order to have Furniture Wizard installed on your workstations, you must first
map a “Network Drive”. Adding a network drive to your computer will give it an extra
“drive” under “My Computer” with the drive letter that you assign. Doing so is simple.
From your desktop, double-click on “Network Neighborhood”. In
here, look for the computer you have designated and setup as a server,
and double-click on it. In here, you should see a folder called “FURNITURE
WIZARD”. This is the Furniture Wizard folder on your server that you have
just shared. Right-click on this folder, and select “Map Network Drive”
This will bring up the “Map Network Drive”
window. Select a letter for your drive to be known as,
preferably a high letter such as W or X, so it won’t
conflict with your existing drives. Also, verify that
“Reconnect at logon” is checked. This will re-establish
the connection to the server every time you turn your
computer on.
Finally, click finish to complete the mapping
process. A new window will come up, with the drive you
just mapped. You can safely close it in order to proceed.
Right-click on FW2000 and
select “Map Network
Drive”
The “Map
Network Drive”
window under
Windows 98
(top) and
Windows
2000/XP (right).
Make sure
“Reconnect at
Logon” is
selected
133