User guide

Appendix A: Using Wireless Scanners with Furniture Wizard

4.4 Pairing Wireless Scanners with Access Point

The next step in the installation and configuration process is to pair each wireless scanner

with each Access Point receiver in your wireless scanner network. This allows a wireless

scanner to successfully maintain contact with a network as it passes in and out of the

communications ranges of specific Access Point units; this is of particular importance in

operations with large physical spaces.

1. To access the proper scanner menu to start the pairing process, simultaneously press the

<7> and <9> keys and the <Power> key in the lower right front corner of the scanner.

When the System Menu appears, press <7> (Bluetooth Menu), followed by the

key.

Figure 69: Accessing Wireless Scanner Main Menu

Simultaneously Press <

> +

<Power>,

When in System

Menu,

press <

>, followed