Owner's Manual
Only
use
the
control
box
provided
in
this
kit
to
control
this
light
strip. This
lamp
will
not
operate
properly
when
connected
to
a standard (incandescent)
dimmer
or
dimming
control
device.
•
Not
intended
for
use
with
emergency
exit
lights.
• Suitable
for
damp
locations.
•
To
prevent early failure,
lamp
should
be
installed
in
operating environment ranging
from -4°F /
-20'C
to
+95'F / +35'C.
• Caution: Risk
of
shock - Turn
off
power
before
inspection
,
installation
or
removal.
Do
not
open
the
light
strip.
No
user serviceable parts inside.
IMPORTANT SAFETY INSTRUCTIONS
This
product
has a polarized
plug
(one
blade
is
wider
than
the
other) as a feature
to
reduce
the
risk
of
electric shock. This
plug
will
fit
in
a polarized
outlet
only
one
way.
If
the
plug
does
not
fit
fully
in
the
outlet,
reverse
the
plug.
If
it
still
does
not
fit
,
contact
a qualified
electrician.
If
it
is necessary
to
use an extension cord,
only
do
so
if
the
light
strip
plug
can
be
fully
inserted
into
the
extension cord, and
the
extension cord can
be
fully
inserted
into
the
electrical outlet. Do
not
alter
the
plug.
CAUTION:
1. Use
only
insulated staples
or
plastic ties
to
secure cords.
2.
Route
and
secure cords so
that
they
will
not
be
pinched
or
damaged
by
furniture.
3.
Not
intended
for
recessed
installation
in ceilings.
4.
The
National
Electrical Code (NEC) does
not
permit
cords
to
be
concealed
where
damage
to
insulation
may
go
unnoticed.
To
prevent
fire danger,
do
not
run cord
behind
walls, ceilings, soffits,
or
cabinets
where
it
may
be
inaccessible
for
examination.
Cords
should
be
visually
examined
periodically
and
immediately
replaced
when
any
damage
is
noted.
5.
If
necessary,
the
light
strip
may
be
cut
to
shorten
its
overall length.
Only
cut
at
designated locations (see
instruction
sheet). Once cut,
the
light
strip
cannot
be
reconnected.