User's Manual

Table Of Contents

WiZ 8285 2416P User manual

3. Functional Description

3.1 WiZclick function

WiZ-8285-2416P modules are built-in the hardware WiZclick circuit. The WiZclick feature to make any

existing hardware switch smarter, the favorite light modes 1 and 2 magically available with your existing

switches.

3.2 Interface Description

Table 3-1. Interface Description

Interface Pin Function Description

PWM

PWM - CW,

PWM - WW,

PWM - R, PWM - G,

PWM - B

Currently the PWM interface has five channels.

PWM interface can realize the control of LED lights.

GPIO5 (or IR) The functionality of the infra-red remote control interface can be

realized via software programming. The interface uses NEC coding,

demodulation. The frequency of the modulated carrier signal is

38kHz. (You can configure this interface to other GPIO)

ADC

AD Tests the input voltage of the ADC pin.

UART

RXD0, TXD0 Communicates with the UART device.

WiZ 8285 2416P User manual V19.09.1 Page 3 of 9