User Manual

Wixey

REMOTE DIGITAL READOUT

MODEL WR525

INSTRUCTIONS

NOT

Always turn off the power and unplug your machine

before installing the WR525.

These instructions demonstrate mounting the WR525 to a

router lift that is laying upside down on its’ top plate. This kit

can also be adapted to shapers and other machines using

similar mounting procedures.

PAGE 1
Wixey NOTE: Always turn off the power and unplug your machine before installing the WR525. REMOTE DIGITAL READOUT MODEL WR525 INSTRUCTIONS These instructions demonstrate mounting the WR525 to a router lift that is laying upside down on its’ top plate. This kit can also be adapted to shapers and other machines using similar mounting procedures.
PAGE 2
PAGE 3
TROUBLE SHOOTING GUIDE 3 Problem Possible Cause Solution Flashing Digits Low Voltage Replace Battery No Display Low Voltage Replace Battery No Display Bad Contact Clean Battery Erratic or Frozen Display Internal Error Remove Battery Wait 1 Minute and Replace
PAGE 4
For questions, comments, and application examples go to: 4 www.wixey.